Select the Unknown device then right click and select "Update Driver Software". After your computer should detect the board and you will see an unknown device within device manager. shut down the Radxa Rock board then connect the Radxa Rock board to the computer and let the board go to loader mode. For Win8 Download the file(usb_driver_v3.7.zip) from here. For WinXp,Vista,Win7,Download the file (usb_driver_v3.5.zip) from here. Now the driver should have been installed successfully!ĭownload driver file first. Then click “Install Driver” and when the driver has finish installing then shut down radxa board and connect the Radxa Rock board to your computer and let the board go to loader mode, then your computer will detect the board and you will see it within device manager. If you've previously tried to install the Rockchip USB drivers for any Rockchip devices make sure you click “Uninstall Driver” first. Then double click on DriverInstall.exe in the RKDriverAssistant directory to start the utility. There’s no need to connect your Rockchip device during this procedure just download and extract RKDriverAssistant.zip Note:The method just support WinXp,Vista,Win7, NOT SUPPORT Win8 If you have already installed the USB driver please skip this step. install manually (WinXp,Vista,Win7,Win8).install using RKDriverAssistant tools - the easy way(Just for winXp, Vista, Win7,not support Win8).Both RKBatchTool and RKDevelopTool rely on the RK USB driver so you will need to install it first as below:
To flash the update.img(you'd better click this link and read this page,it's very Important for the radxa beginner), you need to use the RKBatchTool and to flash the partitions, you will need to use RKDevelopTool. The Windows tool for flashing the image is provided by Rockchip. a micro USB cable with one side plugged in to the OTG port of the board and the other side plugged into the USB port on PC.a PC running Windows (XP 32/64bit, Windows 7 32/64 bit) or Linux (32/64bit).Radxa Rock or Rock Pro or Rock2 Square board.there are Pro and Full/Lite, firmware is different Firmware image, check hardware revision.What you will need to flash the board is: You can always flash the rock, it never bricks (as the name :)) unless some hardware damage occurs. You can download the prebuilt images from our server or build your own images. You can choose to either flash the whole nand image (ie, update.img) to the board or just flash the selected partitions.
This page describes how to install an image to the nand flash of Radxa Rock, ie, how to flash the board.
0 kommentar(er)
